Automotive

Auxbeam LED Light Bar 12″ 72W Driving Light 24pcs 3W Combo Beam Waterproof for Off-Road Truck Car Military Mining Heavy Equipment

#ad
#ad
Auxbeam 77707207AX #ad - 12 inch led light bar of original led chips provides super broad viewing area, Spot 30 Degree & Flood 60 Degree Combo create the best light beam. The ip67 rated waterproof led light bar is protected from dust and capable of withstanding water immersion up to 3 feet for 30 minutes. Up to 7200lm luminous flux and 24 high Power LED Light Bar will light up everything you need to see.

Bottom adjustable mounting brackets of this LED light bar which are convenient and easy to install. They are both certified Auxbeam product, and both have same good quality. Introduction: high quality diecast aluminum housing, 4x4, high lumen output longer valid irradiation distance than normal halogen bulb advanced vertical fin design for maximum heat dissipation ip67 rated construction, dustproof, shockproof Wide operating voltage: it can apply to different kinds of truck, off-road vehicles, military, durable to withstand any harsh conditions Low power consumption, great performance of waterproof, mining and heavy equipment etc Technical Specification: Power: 72W 24pcs*3w high intensity LED chips Operating Voltage: DC 9-32V Luminous Flux: 5040lm~7200lm Beam Type: 30 degreespot beam& 60 degreeflood beam combo Color Temperature: Pure White 6000K Waterproof Rate: IP67 Working temperature: -40~85 degree centigrade Dimensionwith bracket: Approx 302*106*64mm/11.

Auxbeam LED Light Bar 12" 72W Driving Light 24pcs 3W Combo Beam Waterproof for Off-Road Truck Car Military Mining Heavy Equipment #ad - 89*4. 17*2. 52inch material: black diecast aluminum housing, 000 hours life time certified by cE & ROHs Applications: Off-road vehicle, car, SUV, PC lens Mounting Bracket: Stainless steel bracket Above 30, truck, treedozer, engineering vehicle excavator, road roller and crane etc. Special vehiclefire engine, boat, communication vehicle, bus, military command vehicle forklift, rescue vehicle, trains, and tanks etc.

Please rest assured to use.

More information about Auxbeam 77707207AX #ad

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch

#ad
#ad
MICTUNING MIC-B1002 #ad - This wiring harness is up to 10 feet and with 2 leads can hook up 2 light fixtures, it is universal fit for any 7" 10" 12" 20" 30" 40" light bars, espcially good for light bar within 180w. Mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install. Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity.

It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w. Great construction:40a power relay and inline blade fuse for multiple safety protection. With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.

MICTUNING MIC-B1002 LED Light Bar Wiring Harness, Fuse 40A Relay On-off Waterproof Switch #ad - Cautions:we recommend professional installation, we suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, the harness would melt and even caught a fire, pls let professinal installer to wire the harness kit; If let the wire short circuit, or it would got melt as well.

What you'll get: 1 yr mictuniNG Warranty and lifetime Friendly Customer Service. Connect the red+/black- wire of the switch to battery or any place of your car system to get power for the switch; 4. Great construction Quality wiring material - UL approved. Inline blade fuse & 40A relay - multiple safety protection.

More information about MICTUNING MIC-B1002 #ad


Similar products



for Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder - LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" 2 Clamps Includes Allen Hex Key User-Friendly

#ad
#ad
LAMPHUS 5823927098 #ad - Simplify led light bar installations on your roof rack, bull bar, or headache rackThe LAMPHUS Cruizer Horizontal Bar Clamp Mounting Kit makes installing Cruizer off-road light bars or other light bars with 10mm mounting screws onto your roof rack, bull bar, or headache rack a breeze. Install multiple light bars on a versatile range of applications, ATVs, and UTVs, including off-road vehicles like Jeeps, or construction & highway maintenance vehicles.

Precision-crafted quality painstakingly crafted from premium-grade cast aluminum, these clamps are designed to provide a strong, stable and secure mount for your off-road light bars. Rubber inserts are also included for a snugger fit with a larger range of tube sizes and protect your bars and racks from being damaged during installation.

Features:simplifies the installation of led light bars onto your roof rack, bull bar, or headache rackcompatible with tubes of 1", 1-1/2", 1-3/4" & 2" in diameterFits all light bars with 10mm mounting screwsIncludes Allen Hex KeyPackage Content:2 x Clamp2 x 1” Rubber Insert 2 pc2 x 1-1/2” Rubber Insert 2 pc2 x 1-3/4” Rubber Insert 2 pc2 x 2” Rubber Insert 2 pcDoubled Sided Tape for 2" tubes.

for Light Bar Bull Bar Tube Clamp Roof Roll Cage Holder - LAMPHUS Cruizer LED Off-Road Light Horizontal Bar Clamp Mounting Kit 1"/ 1.5"/ 1.75"/ 2" 2 Clamps Includes Allen Hex Key User-Friendly #ad - 2 x allen hex key mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install. Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w. Great construction:40a power relay and inline blade fuse for multiple safety protection.

With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.

More information about LAMPHUS 5823927098 #ad


Similar products



Auxbeam LED Light Bar Wiring Harness with Rocker Switch 3Pcs Switching Lines Power Relay and Fuse

#ad
#ad
Auxbeam #ad - Package included: 1 x led switch 3 x switching lines 1x wiring loom harness kit with fuse and relay Mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install. Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.

Great construction:40a power relay and inline blade fuse for multiple safety protection. With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.

Auxbeam LED Light Bar Wiring Harness with Rocker Switch 3Pcs Switching Lines Power Relay and Fuse #ad - Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; If let the wire short circuit, the harness would melt and even caught a fire, We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, or it would got melt as well.

Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, roll cage, or headache rack. Almost endless applications- can be used on tubes measuring 1", trucks, atvs, 1.

75" & 2" in diameter; perfect for off-road vehicles, Jeeps, 1. 5", boats, utvs, farm vehicles & more. Cast aluminum construction- precision-welded from cast aluminum, our clamps are strong & built to last.

More information about Auxbeam #ad


Similar products



Auxbeam LED Light Bar Rocker Switch with 3Pcs Switching Lines Wiring Loom Harness Kit with Fuse and Relay

#ad
#ad
Auxbeam 5823987602 #ad - Ce certified quality, made of environmentally friendly anti-retardant materials. Led bar switch is suitable for conversion control car people all equipment. Made of environmentally friendly anti-retardant materials. Can be assembled with a DC 24V relay not supplied. Technical specification: switch operation: on-off working voltage:12-24v working current:20a introduction: universal harness kit with mouse style witch can wire two lights meanwhile DC12V 40A rated automotive relay Can be assembled with a DC 24V relaynot supplied Blade fuse holder with replaceable 30A fuse Up to 2M of wiring, RVs, buses, work light etc Fitment: Suitable for all 12 / 24v car battery installation, boats, boats, terminal ends on most wires On/off switch with adhesive tape backing for easy mounting Apply to: Off-road driving light, such as cars, trailers, fog light, motorcycles, etc.

Blade fuse holder with replaceable 30A fuse. Ultra-high-end luxury switch with LED indicator light. Package included: 1 x led switch 3 x switching lines 1x wiring loom harness kit with fuse and relay Mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install. Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity.

Auxbeam LED Light Bar Rocker Switch with 3Pcs Switching Lines Wiring Loom Harness Kit with Fuse and Relay #ad - It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w. Great construction:40a power relay and inline blade fuse for multiple safety protection. With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs.

More information about Auxbeam 5823987602 #ad


Similar products



Auxbeam 20 Inch LED Light Bar 126W LED Bar with 42pcs 3W Led Off Road Driving Lights Spot Flood Combo Beam for Jeep Driving Off Road ATV SUV UTV

#ad
#ad
Auxbeam 5823979622 #ad - Apply to: off-road driving light, fog light, work light etc. Adjustable mounting brackets: This work light provides bottom mounting brackets which are convenient and easy to install. Please rest assured to use. Output circuit protection, overload protection, reverse polarity protection, multiple protection, safety to use.

Package included: 1 x led switch, 3 x Switching lines, 1x wiring loom harness kit with fuse and relay. Led switch can wire two lights meanwhile. Ultra-high-end luxury switch with LED indicator light. Apply to: off-road driving light, fog light, work light etc. Can be mounted anywhere on the vehicle. Well-design: the reflector cup and projector lens design dramatically increases light projection distance and overall visibility to enhance safety performance.

Auxbeam 20 Inch LED Light Bar 126W LED Bar with 42pcs 3W Led Off Road Driving Lights Spot Flood Combo Beam for Jeep Driving Off Road ATV SUV UTV #ad - Blade fuse holder with replaceable 30A fuse. Lightbars up to 12600lm and 42 pcs high power LED will provide you broad view and a long irradiation distance. New mounting brackets will replace the old ones. Ce certified quality, made of environmentally friendly anti-retardant materials. Led bar switch is suitable for conversion control car people all equipment.

Output circuit protection, overload protection, reverse polarity protection, multiple protection.

More information about Auxbeam 5823979622 #ad


Similar products



LAMPHUS 2PC Off-Road LED Light Bar 0.75"/1"/1.25" Horizontal Bar Clamp Mounting Kit Rubber Teeth Aluminum Includes Hex Key for Bull Bars, Roof Racks, Roll Cages for ATVs, UTVs, and Trucks

#ad
#ad
LAMPHUS 5823980066 #ad - Adjustable mounting brackets: This work light provides bottom mounting brackets which are convenient and easy to install. That's why every mini bar clamp comes with a 90-day return policy, 2-year warranty, and the best US based telephone support in the business. Apply to: off-road driving light, fog light, work light etc.

Protected - we stand by our products. The mini bar clamp kit comes with everything you need to mount your bar clamp, and doesn't require any drilling. Simply choose the rubber teeth inserts you need, and bolt the clamp using a hex key. The best support in The Business And hey. Up to 2m of wiring, terminal ends on most wires.

LAMPHUS 2PC Off-Road LED Light Bar 0.75"/1"/1.25" Horizontal Bar Clamp Mounting Kit Rubber Teeth Aluminum Includes Hex Key for Bull Bars, Roof Racks, Roll Cages for ATVs, UTVs, and Trucks #ad - Light bar rocker switch is suitable for all 12 / 24v car battery installation, buses, motorcycles, boats, boats, RVs, such as cars, trailers, etc. Blade fuse holder with replaceable 30A fuse. Can be assembled with a DC 24V relay not supplied. A lot. Can be mounted anywhere on the vehicle. Well-design: the reflector cup and projector lens design dramatically increases light projection distance and overall visibility to enhance safety performance.

It's that easy.

More information about LAMPHUS 5823980066 #ad


Similar products



Auxbeam 4 Pcs 4" LED Light Bar 18W LED Pods Spot Beam with 6pcs 3W LEDs Chips Driving Light Waterproof LED Bar

#ad
#ad
Auxbeam 5823983765 #ad - Plus, simply bolt it over your handlebars, the Mini Bar Clamp accessories kit comes with everything you need for installation. Your purchase. Made of environmentally friendly anti-retardant materials. On/off switch with adhesive tape backing for easy mounting. With the mini bar clamp, and mount your light bar onto the clamp.

That's why every mini bar clamp comes with a 90-day return policy, 2-year warranty, and the best US based telephone support in the business. Mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install. Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity.

It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w. Great construction:40a power relay and inline blade fuse for multiple safety protection. With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.

Auxbeam 4 Pcs 4" LED Light Bar 18W LED Pods Spot Beam with 6pcs 3W LEDs Chips Driving Light Waterproof LED Bar #ad - Cautions:we recommend professional installation, pls let professinal installer to wire the harness kit; If let the wire short circuit, the harness would melt and even caught a fire, We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, or it would got melt as well.

Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, roll cage, bull bar, or headache rack. Almost endless applications- can be used on tubes measuring 1", trucks, atvs, 1.

More information about Auxbeam 5823983765 #ad


Similar products



Auxbeam 4 Pcs 4" LED Light Bar 18W LED Pods 1800LM Flood Beam Off Road Lights for SUV ATV UTV Jeep Trucks Pickup

#ad
#ad
Auxbeam 5823983794 #ad - Ultra-high-end luxury switch with LED indicator light. 3d lens makes 100% efficiency of LED Bar. Wide application: for off-road cars, boats, suvs, back-up light, atvs, etc. Apply to: off-road driving light, fog light, work light etc. Up to 2m of wiring, terminal ends on most wires. The light bar switch is safe to use.

Plus, simply bolt it over your handlebars, the Mini Bar Clamp accessories kit comes with everything you need for installation. Your purchase. For mounting onto the aluminum teeth directly, the mini bar clamp comes with an additional rubber strip to prevent the aluminum from being worn down. No drilling - tired on drilling holes on your bar? us too.

Ce certified quality, made of environmentally friendly anti-retardant materials. Led bar switch is suitable for conversion control car people all equipment. Lightbars up to 12600lm and 42 pcs high power LED will provide you broad view and a long irradiation distance. Blade fuse holder with replaceable 30A fuse.

Auxbeam 4 Pcs 4" LED Light Bar 18W LED Pods 1800LM Flood Beam Off Road Lights for SUV ATV UTV Jeep Trucks Pickup #ad - Adjustable mounting brackets: This work light provides bottom mounting brackets which are convenient and easy to install. The rubber teeth also help dampen vibrations, stops the metal from being worn down and keeps your bars protected all the way through. Sturdy aluminum & rubber strip- the mini bar clamp is built using precision-welded cast aluminum, allowing it to be both lightweight and durable, and easy to hang onto get it?

More information about Auxbeam 5823983794 #ad


Similar products



Auxbeam Side Shooter LED Pods 4" 36W LED Light Bar Off Road Light Pods 19pcs 1w Led Chips Spot Flood Combom Beam Pack of 2

#ad
#ad
Auxbeam #ad - Ultra-high-end luxury switch with LED indicator light. Ce certified quality, made of environmentally friendly anti-retardant materials. Led bar switch is suitable for conversion control car people all equipment. That's why every mini bar clamp comes with a 90-day return policy, 2-year warranty, and the best US based telephone support in the business.

Package included:: 2 x 18w led driving light Mictuning mic-b1002 wiring harness kit with Waterproof Red on/off toggle switch and easy to install. Details makes perfect:adopt flexible strand copper wire, up to 180 watt load capacity. It is universal fit for any 7" 10" 12" 20" 30" 40" light bars that is within 180w.

Auxbeam Side Shooter LED Pods 4" 36W LED Light Bar Off Road Light Pods 19pcs 1w Led Chips Spot Flood Combom Beam Pack of 2 #ad - Great construction:40a power relay and inline blade fuse for multiple safety protection. With 2 lights output connections, it can hook with 2 led work light or 2 small watt led light bar and any else off road LEDs. 10ft extendable wiring harness:up to 10ft of wiring that is plenty of length to put it where you want.

Cautions:we recommend professional installation, the harness would melt and even caught a fire, pls let professinal installer to wire the harness kit; If let the wire short circuit, We suggest that wrap all exposed wire with electrical tape to avoid a short circuit; Pls make sure your light within power 180W, or it would got melt as well.

Add more lights, less hassle- simplify the installation of led light bars & work lights without drilling any holes in the bodywork; quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, roll cage, or headache rack. Almost endless applications- can be used on tubes measuring 1", trucks, atvs, 1.

More information about Auxbeam #ad


Similar products



Auxbeam LED Light Bar 4 inch LED Pods 18W Driving Light 2Pcs 3W Spot Beam for Jeep, ATV, Truck, Boat

#ad
#ad
Auxbeam 5823983767 #ad - Lumen: 1800lm. Beam type: 30 degreespot beam& 60 degreeflood beam combo. Color temperature: 6000k; Working Life: 30000 hours above life time. Material for 4 inch side shot pods: Diecast aluminum housing. Lightbars up to 12600lm and 42 pcs high power LED will provide you broad view and a long irradiation distance.

Auxbeam LED Light Bar 4 inch LED Pods 18W Driving Light 2Pcs 3W Spot Beam for Jeep, ATV, Truck, Boat #ad - 3d lens makes 100% efficiency of LED Bar. Wide application: for off-road cars, boats, atvs, back-up light, suvs, etc. Universal Harness kit with mouse style witch. Led light switch is suitable for all 12 / 24v car battery installation, RVs, boats, such as cars, buses, trailers, motorcycles, boats, etc. The mini bar clamp is designed specifically for bars with a smaller diameter ranging from.

75" to 1" to 1. 25". Low current draw 5. [email protected], 2. [email protected]: no harms to battery and save gas. Led offroad lights with ip 67 waterproof rate, great performance of dust, longer valid irradiation distance than normal halogen bulb. It is durable to withstand any harsh condition. Voltage: 9 ~ 32v.

More information about Auxbeam 5823983767 #ad


Similar products