As an Amazon Associate I earn from qualifying purchases.
ELECTROCOOKIE #ad - The terminal board is soldered, assembled and ready-to-use. Useful for esp32-devkitc Installation Projects Using GPIO pins. Note: the package does not include ESP32-DevKitC.
Aideepen #ad - Finished productthese boards are fully assembled. Little tipsit lables for arduino nano version 3. 0, however you can still use this adapter for the older version just have to remember that A0-A7 are in the reverse order.
No soldering required. Easy to useyou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard. Nice platform for wiring circuitsit provided a nice platform for wiring circuits to Arduino Nano.
HCDC #ad - The item has been soldered and assembled. Gpio status led and power 5v / 3. 3v indication. Terminal block pitch 3. 5mm/0138", screw m2 steel, pin header and cage copper. Packing list: 1x terminal block breakout module, 4x m2.
5x6mm nylon standoffs, 4x M2. 5x16mm nylon standoffs, 4x M2. 5 nylon nutsnote: the item not include Raspberry Pi Board. 5v blue, gpios green. The driving current of each LED is only 01ma, 3.
Support for raspberry pi a+ 3A+ B+ 2B 3B 3B+ 4B. Gpio output or input level high led on, output or input level low led off. 2 x 20 pins expansion pin header, strip length 5mm, wire size range 26AWG to 16AWG, height 8mm/0.32".
ELECTROCOOKIE #ad - Useful for arduino Uno Installation Projects Using GPIO pins. Offered with 20pin ribbon cable2feet, 60cm, Mounting Screws, Standoffs, and Screw Driver.
KeeYees #ad - One pin is wired on both sides. The required fixed components can be directly welded to facilitate circuit design. Complete parts this kit contains enough parts, screw terminals, such as customized PCB board, pin headers.
Not only can the pins be connected through the pin header part, but also the terminal part can be expanded to lead out the same pins. It is fully compatible with ESP8266 ESP-12E. Mini pcb breadboard an independent power row hole is led out at the front end of the PCB board.
Double-layer pcb the expansion board is a double-layer board. You just need to solder them together. For esp8266 esp-12e specially designed by keeyees technical team. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission. Just select them according to your purpose.
Treedix #ad - Compared with other products, the wiring terminals in this product do not need screws, and it is simple and easy to operate.
Note: the package does not include the Raspberry Pi board. This kit is compatible with raspberry pi 1b, Pi 4B, Pi 3B+, pi zero, Pi 2B, Pi 3B, Pi Zero-W. Just insert the bread wire directly.
Treedix #ad - The module is small in size and does not occupy other space. Compatible with raspberry pi: this gpio terminal block is compatible with raspberry Pi 1 Model B+, Pi Zero, Pi 2 Model B, Pi 4 Model B, Pi 3 Model B+, Pi 3 Model B, Pi Zero-W.
Easy to operate: use this module to easily extend the Raspberry pi Zero project to the Internet of Things or industrial control applications.
WYPH #ad - It lables for arduino nano version 1. 0, however you can still use this adapter for the new version V3. 0 It can connect a large number of digital lines for Arduino while maintaining the footprint of the original Nano.
No soldering required. It can work very well for Arduino Nano projects. The board is fully assembled.
GeeekPi #ad - Compatible with all raspberry pi series:for raspberry pi 1 model b+, pi 3 Model B, Pi Zero, Pi 2 Model B, Pi 4 Model B, Pi 3 Model B+, Pi Zero-W. Does not occupy other space, very convenient when doing DIY circuits. Package includes:1 x mini terminal breakout board for raspberry pi;1 x silk-mark color stickers;1 x Acrylic Pannel;4 x M2.
Gikfun #ad - It can be plugged directly into the Arduino controller. It offers a reliable and convenient solution for connecting more Arduino components to the Arduino controller. Newest vision UNO R3 compatible. Direct plug puzzle board, NO soldering needed.
1. ELECTROCOOKIE
#adCompatible for ESP32-DevKitC, Push-in Simple Spring Connector Expansion PCB Module, ELECTROCOOKIE ESP32 Terminal Block Shield Kit
#adMore information #ad
Simple push-in type terminal Block Breakout Shield for ESP32-DevKitC. Offered with 20pin ribbon cable2feet, Mounting Screws, Standoffs, 60cm, and Screw Driver.| Brand | ELECTROCOOKIE #ad |
| Manufacturer | ELECTROCOOKIE #ad |
| Height | 0.59 Inches |
| Length | 2.76 Inches |
| Width | 3.39 Inches |
| Part Number | EC_PS_ESP32_TB_V1 |
More information #ad
2. Aideepen
#adAideepen 5pcs Nano Screw Terminal Adapter Shield Expansion Board Nano V3.0 AVR ATMEGA328P-AU Module
#adNo soldering required. Easy to useyou can use this adapter to easily hook up Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard. Nice platform for wiring circuitsit provided a nice platform for wiring circuits to Arduino Nano.
More information #ad
It can connect a large number of digital lines to Arduino while maintaining the footprint of the original Nano. Size is about 2. 21" x 1. 65" x 050" l* w* h. Designed for arduino nano v3. 0the item is a terminal expansion adapter, working very well for prototyping Arduino Nano projects. Any questions, you can contact me by email at any time.| Brand | Aideepen #ad |
| Manufacturer | Aideepen #ad |
| Part Number | 70100945 |
| Warranty | 1 |
More information #ad
3. HCDC
#adHCDC RPi GPIO Status LED & Terminal Block Breakout Board HAT for Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B
#ad5x6mm nylon standoffs, 4x M2. 5x16mm nylon standoffs, 4x M2. 5 nylon nutsnote: the item not include Raspberry Pi Board. 5v blue, gpios green. The driving current of each LED is only 01ma, 3.
More information #ad
3v red, so you don't have to worry about it affecting the read and write status of GPIO. The position of the led is in a one-to-one correspondence with the position of the Raspberry Pi 2x20pin connector, and the logic level of the GPIO can be observed very quickly and intuitively. Support for raspberry pi a+ 3A+ B+ 2B 3B 3B+ 4B. Gpio output or input level high led on, output or input level low led off. 2 x 20 pins expansion pin header, strip length 5mm, wire size range 26AWG to 16AWG, height 8mm/0.32".
| Brand | HCDC #ad |
| Manufacturer | Xiken Electronic Technology Co., Ltd. #ad |
| Part Number | HD040 |
More information #ad
4. ELECTROCOOKIE
#adCompatible for Arduino Uno R3, ELECTROCOOKIE Uno Terminal Block Shield Kit, Push-in Simple Spring Connector Expansion PCB Module
#adMore information #ad
Note: the package does not include Arduino Uno. The terminal board is soldered, assembled and ready-to-use. Simple push-in type Terminal Block Breakout Shield for Arduino Uno.| Brand | ELECTROCOOKIE #ad |
| Manufacturer | ELECTROCOOKIE #ad |
| Part Number | EC_PS_UNO_TB_V1 |
More information #ad
5. KeeYees
#adKeeYees 2pcs Expansion PCB Board with Screw Terminal Block Pin Header for ESP8266 for NodeMCU WiFi Development Board
#adNot only can the pins be connected through the pin header part, but also the terminal part can be expanded to lead out the same pins. It is fully compatible with ESP8266 ESP-12E. Mini pcb breadboard an independent power row hole is led out at the front end of the PCB board.
More information #ad
It expands all the pins, which is very suitable for the project on the ESP8266 module. Gpio 1 into 2 this expansion board can expand one gpio pin of development board to two, which is convenient for users to reuse all pins in smart home projects. Double-layer pcb the expansion board is a double-layer board. You just need to solder them together. For esp8266 esp-12e specially designed by keeyees technical team. Therefore, the circuit is stable and highly reliable, and there will be no poor circuit contact and unstable signal transmission. Just select them according to your purpose.
| Brand | KeeYees #ad |
| Manufacturer | KeeYees #ad |
| Part Number | KYES100 |
More information #ad
6. Treedix
#adTreedix Mini 40pin Pinout GPIO Spring Terminal Block Breakout Expansion Solderless Board Module Compatible with Raspberry Pi
#adNote: the package does not include the Raspberry Pi board. This kit is compatible with raspberry pi 1b, Pi 4B, Pi 3B+, pi zero, Pi 2B, Pi 3B, Pi Zero-W. Just insert the bread wire directly.
More information #ad
Spring terminal spacing 2. 54mm / 01" screw M2. 5, pin seat and cage copper. The breakout board is of good quality, using high-quality materials, the gold-plated surface can prevent oxidation, and all holes are plated to improve the installation strength. Easy to install andconnect.| Brand | Treedix #ad |
| Manufacturer | Treedix #ad |
| Part Number | TRX5-0072 |
More information #ad
7. Treedix
#adTreedix RPi GPIO Terminal Block Breakout Board Module Expansion Board Compatible with Raspberry Pi 4B/3B+/3B/2B/Zero/Zero W
#adEasy to operate: use this module to easily extend the Raspberry pi Zero project to the Internet of Things or industrial control applications.
More information #ad
Note: this project needs to be welded and assembled by yourself. It is very convenient when making DIY circuits, and the wires can be easily inserted into the terminals. There is a mark on the breakout board that can clearly identify the pin position, Breakout board is of excellent quality and adopts double-sided gold forming process.| Brand | Treedix #ad |
| Manufacturer | Treedix #ad |
| Warranty | returnable |
More information #ad
8. WYPH
#adWYPH Nano Terminal Adapter Shield Expansion Board for Arduino Nano V3.0 AVR ATMEGA328P-AU Module Terminal Adapter 3pcs
#adNo soldering required. It can work very well for Arduino Nano projects. The board is fully assembled.
More information #ad
It provided a nice platform for wiring circuits for Arduino Nano. This item is a terminal expansion adapter, designed for Arduino Nano V3. 0 You can use this adapter to easily hook up for Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard.| Brand | WYPH #ad |
| Manufacturer | Shenzhen Weiyapuhua Technology Co.,Ltd #ad |
| Part Number | 60-026-3 |
| Model | 60-026-3 |
More information #ad
9. GeeekPi
#adGeeekPi Raspberry Pi Micro GPIO Terminal Block Breakout Board Module,Raspberry Pi GPIO Expansion Board Micro Connector for Raspberry Pi 4B/3B+/3B/2B
#adMore information #ad
5 copper pillar;6 x M2. 5 screw;2 x M2. 5 double pass copper pillar; 2 x Nut; 1 x Screw Driver. Silk screen sticker for easy identification. All 40pins of raspberry pi are transferred out by screw terminals, which is convenient for cable access.| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Part Number | EP-0141 |
| Warranty | GeeekPi |
More information #ad
10. Gikfun
#adGikfun Screw Shield Expansion Board for Arduino UNO R3 EK7007
#adMore information #ad
| Brand | Gikfun #ad |
| Manufacturer | Esooho #ad |
| Height | 2.1 Inches |
| Length | 3.1 Inches |
| Width | 0.4 Inches |
| Part Number | LYSB014SGTP20-ELECTRNCS |
| Model | LYSB014SGTP20-ELECTRNCS |
More information #ad
