As an Amazon Associate I earn from qualifying purchases.
LoveRPi #ad - Long lasting exact fit: cpu and lan chipset heatsinks are fabricated specifically for the Raspberry Pi 3 Model B+ and B. That is hot enough to boil water! together with active cooling an active cooling case like the LoveRPi Active Cooling Media Center PC Case, the heatsink will keep temperatures below 20°C above ambient.
Extreme performance: straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Double-sided 3m thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.
For raspberry pi 3 model b, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+. Mandatory for applications in high temperature, sealed, or overclocked applications.
LoveRPi #ad - Built for cluster nodes: simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. Ultimate power over ethernet hat for raspberry pi 3 b+: deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters.
Poe switch and raspberry Pi 3 Model B+ sold separately. Raspberry pi 3 model b+ sold separately! not compatible with raspberry pi 4 or raspberry pi 3 model b and older models: Previous Raspberry Pi boards do not feature the onboard PoE header and will not be compatible with this device! Raspberry Pi 4 requires the newer HAT specifically for Raspberry Pi 4.
Anodized heatsink and ventilated case with cooling fan included: raspberry pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Power over ethernet switch required: network switch must be compliant with IEEE 802. 3af poE standard. Poe power output must be within the budget of the switch when powering multiple boards.
MazerPi #ad - 8810 thermal conductive adhesive tape backing, good performance on heat dissipation and long lasting. Fits for most of raspberry Pi models, compatible with most Raspberry Pi cases.
Pastall #ad - The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting. The heatsinks also could be used for cooling development board laptop cpu gpu vga ram vram vrM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.
It is an excellent heat sink for heat dissipation in electronic DIY, You will love it! As a raspberry pi heat sink using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink, it has good heat dissipation performance and compatible with most Raspberry Pi cases.
DIGISHUO #ad - Additionally it adds wireless LAN & Bluetooth connectivity making it the ideal solution for powerful connected designs. With other part will be a complete kit include sd card/adapter/case/hdmi cable/heatsink.
Whilst maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.
Mudder #ad - Can be applied with other devices such as the BeagleBone. Raspberry pi not included. Package includes 10 x aluminum heat sinks. Adhesive thermal tape backing. Suitable for raspberry pi models A, B+, 2, B, and 3 boards.
ALLEU #ad - Perfect for arduino, Raspberry Pi, and other programming boards. Self-adhesive back tape makes it easy to stick on a platform, like the Arduino prototype shield. The jumper wires are easy to insert into the breadboard. Easy to use: the breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling.
GeeekPi #ad - Package includes: 5x acrylic plates, 1x screw driver, 4x cooling fans with metal protective cover, 16x Heatsinks for Raspberry Pi 4 Model BAdded on 2019.8. 2, 12x heatsinks for raspberry pi 3b+/3B/2B, 1x Screw Set, 1x Instruction Manual.
Compatible with raspberry pi 4 model b & raspberry pi 3 b+ & raspberry pi 3/2 model b; Raspberry Pi Board Not Included! Access to all ports and slots of raspberry Pi, GPIO port, USB ports, including SD card slot, HDMI port and so on.
Pastall #ad - Also could be used with other devices such as the Beaglebone. Fits for raspberry pi models a, 4 boards, B+, 3, B, 2, compatible with most Raspberry Pi cases. Thermal conductive adhesive tape backing, good performance on heat dissipation and long lasting.
1. LoveRPi
#adLoveRPi Performance Heatsink Set for Raspberry Pi 3 B+
#adExtreme performance: straight-fin design with twice the height of other heatsinks for extra heat dissipation performance whether actively or passively cooled. Double-sided 3m thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.
More information #ad
Must have for raspberry pi 3: at full load, bcm2837 soc will reach 100°c. No more throttling: reduce chip hot-spots and increase thermal dissipation surface area by 10x. Quick and simple installation: peel and stick in the orientation with the most airflow. For raspberry pi 3 model b, cooling amplification for CPU die area is over 100x! Say goodbye to temperature based performance throttling and maintain consistent maximum performance. Most effective solution for reliable performance and longevity. No more messy thermal paste and compatible with LoveRPi Power over Ethernet HAT for Raspberry Pi 3 Model B+. Mandatory for applications in high temperature, sealed, or overclocked applications.
| Brand | LoveRPi #ad |
| Manufacturer | LoveRPi #ad |
| Height | 0.39 Inches |
| Length | 0.79 Inches |
| Weight | 0.02 Pounds |
| Width | 0.39 Inches |
| Part Number | HS2B |
| Model | LYSB018BGRDVS-ELECTRNCS |
More information #ad
2. LoveRPi
#adLoveRPi Power-Over-Ethernet PoE HAT Kit for Raspberry Pi 3 Model B+ with Black Case
#adPoe switch and raspberry Pi 3 Model B+ sold separately. Raspberry pi 3 model b+ sold separately! not compatible with raspberry pi 4 or raspberry pi 3 model b and older models: Previous Raspberry Pi boards do not feature the onboard PoE header and will not be compatible with this device! Raspberry Pi 4 requires the newer HAT specifically for Raspberry Pi 4.
More information #ad
This poe hat was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market. Anodized heatsink and ventilated case with cooling fan included: raspberry pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Power over ethernet switch required: network switch must be compliant with IEEE 802. 3af poE standard. Poe power output must be within the budget of the switch when powering multiple boards.
| Brand | LoveRPi #ad |
| Manufacturer | LoveRPi #ad |
| Part Number | LRP-RPIHAT-POE-RPI3BP-BLK-CASE |
More information #ad
3. Raspberry
#adRaspberry Pi 4 Model B 2019 Quad Core 64 Bit WiFi Bluetooth 4GB
#adRaspberry #ad - 0, double-true Gigabit Ethernet. 2 × usb 3. 11b/g/n/ac wireless lan, Bluetooth 5. 0 ghz ieee 802. Requires 5. 5ghz-4gb lpddr4-2400 sdraM. 2. 0 ports, 2 x usb 2. 2-lane mipi dsi/csi ports for camera and display--4-pole stereo audio and composite video port--Micro SD card slot for loading operating system and data storage.More information #ad
0 ports-2 × micro hdmi ports supporting up to 4Kp60 video resolution. 1v, 3a power via usb type C or gpio-poep power over Ethernet enabled requires PoE hat-not included. Broadcom bcm2711, quad-core cortex-a72 arm v8 64-bit soc @ 1. 4 ghz and 5.| Brand | Raspberry #ad |
| Manufacturer | Raspberry Pi #ad |
| Height | 1.18 Inches |
| Length | 3.94 Inches |
| Weight | 0.11 Pounds |
| Width | 2.76 Inches |
| Part Number | SC15185 |
| Model | RAS-4-4G |
| Warranty | 30 |
More information #ad
4. MazerPi
#ad16 Pcs Raspberry Pi 4 Heatsink, MazerPi Raspberry Pi Heatsink Set Aluminum Heatsink with 3M 8810 Thermal Pad Heatsink for Raspberry Pi 4 Model B/ 3B+/ 3B/ 2B Blue&Black
#adMore information #ad
Also could be used with other devices such as the Beaglebone. High perfromance raspberry Pi heatsink with Thermal Conductive Adhesive Tape. Package included :16 Pcs Heatsink.| Brand | MazerPi #ad |
| Manufacturer | MazerPi #ad |
| Height | 0.39 Inches |
| Length | 1.97 Inches |
| Width | 1.18 Inches |
| Part Number | HSBT001 |
| Model | MP-RP-025 |
More information #ad
5. Pastall
#adAluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4, Pastall 100 PCS 8 Different Sizes Heatsink Kit with Conductive Adhesive Tape
#adIt is an excellent heat sink for heat dissipation in electronic DIY, You will love it! As a raspberry pi heat sink using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink, it has good heat dissipation performance and compatible with most Raspberry Pi cases.
More information #ad
The 100 pcs 8 different sizes heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation. This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink It Contains 8 different sizes of heat sink, Please check the specific size on the picture.| Brand | Pastall #ad |
| Manufacturer | Pastall #ad |
| Part Number | PT2019080503 |
| Model | PT2019080503 |
More information #ad
6. DIGISHUO
#adDIGISHUO 9 in 1 Complete Starter Kit Raspberry Pi 3 Model B Module&Two Cases&HDMI Cable&32G SD Card&Heatsink Kit&P Fan
#adWhilst maintaining the popular board format the Raspberry Pi 3 Model B brings you a more powerful processor, 10x faster than the first generation Raspberry Pi.
More information #ad
This powerful credit-card sized single board computer can be used for many applications and supersedes the original Raspberry Pi Model B+ and Raspberry Pi 2 Model B. The raspberry pi 3 model B is the third generation Raspberry Pi.| Brand | DIGISHUO #ad |
| Manufacturer | DIGISHUO #ad |
| Height | 2.8 Inches |
| Length | 7.5 Inches |
| Width | 4.3 Inches |
| Part Number | 3B7 |
More information #ad
7. Mudder
#adMudder Black Aluminum Heatsink Cooler Cooling Kit for Raspberry Pi 3, Pi 2, Pi Model B+, 10 Pieces
#adMore information #ad
| Brand | Mudder #ad |
| Manufacturer | Mudder #ad |
| Height | 0.59 Inches |
| Length | 2.87 Inches |
| Weight | 0.02 Pounds |
| Width | 2.36 Inches |
| Part Number | LYSB01LXWK626-ELECTRNCS |
| Model | LYSB01LXWK626-ELECTRNCS |
More information #ad
8. ALLEU
#adALLUS Passive Heatsinks for Raspberry Pi 3 Model B for Sticking On 3 x 4sets alu
#adMore information #ad
With tight plug-in contacts, the components will sit well after assembly and nothing will wobble. Solderless breadboard is convenient for the prototypes and circuit design experiment and other DIY projects.| Brand | ALLEU #ad |
| Manufacturer | ALLEU #ad |
| Part Number | AL-H-001 |
| Model | AL-H-001 |
More information #ad
9. GeeekPi
#adRaspberry Pi 3/2 Model B, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, GeeekPi Raspberry Pi Cluster Case for Raspberry Pi 4 Model B
#adCompatible with raspberry pi 4 model b & raspberry pi 3 b+ & raspberry pi 3/2 model b; Raspberry Pi Board Not Included! Access to all ports and slots of raspberry Pi, GPIO port, USB ports, including SD card slot, HDMI port and so on.
More information #ad
The metal protective cover on the top will protect the cooling fan against being destroyed. The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The instruction manual will tell you how to assemble step by step.| Brand | GeeekPi #ad |
| Manufacturer | GeeekPi #ad |
| Weight | 0.57 Pounds |
More information #ad
10. Pastall
#adAluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi B B+ 2/3/4, 30 PCS Raspberry Pi 4 Heatsink Kit with Thermal Conductive Adhesive Tape
#adMore information #ad
Raspberry pi 30 pcs heatsink kit with Thermal Conductive Adhesive Tape. Package included :24 pcs aluminum heatsink + 6 pcs copper heatsink.| Brand | Pastall #ad |
| Manufacturer | Pastall #ad |
| Part Number | PT2019080501 |
| Model | PT2019080501 |
More information #ad
