Top 7 WeMos D1 Mini PRO With Antenna – Computer Networking Antennas

As an Amazon Associate I earn from qualifying purchases.

1. Mayata

#ad

Mayata WEMOS D1 Mini Pro 4MB/16MB External Antenna Connector NodeMCU Based esp8266 Series Antenna ESP-8266EX CP2104 WiFi Development Board Development Board + Antenna 128MBIT=16MB

#ad
Mayata #ad - Lange weibliche pins x2pcs, normal pins x2pcs, kurze weibliche pins x2pcs, WeMos D1 mini Pro x1pcs.11xi/o pin, support ota online, 1xadc pin input 0-3. 3v, onboard 5v 1a switching power supply large input 24V. Compatible with Arduin, use Arduino IDE for programming. Based on esp8266 esp-8266ex cP2104. 32mbit=4mb, 128mbit=16mb, esp8266 series wifi wireless antenna x1pcs.
BrandMayata #ad
ManufacturerMayata #ad

2. Teyleten Robot

#ad

Teyleten Robot D1 Mini PRO Development Board ESP8266 CP2104 16M Bytes External Antenna Connector ESP8266 WiFi IoT Board for WeMos 3PCS

#ad
Teyleten Robot #ad - Onboard 5v 1a switching power supply maximum input 24V. 1xadc pin input 0-3. 3v. Ota online support. Arduino-compatible, using Arduino IDE for programming. Based on the esP - 8266. 11 the xi/O pins.
BrandTeyleten Robot #ad
ManufacturerTeyleten Robot #ad
WarrantyNoWarningApplicable

3. Aideepen

#ad

Aideepen D1 PRO Development Board ESP8266 CP2104 16M Bytes External Antenna Connector ESP8266 WiFi IoT Board for WeMos

#ad
Aideepen #ad - Package included: 1*d1 mini pro board; 2*long female pins; 2*short female pins; 2*normal pins. Same size as D1 mini, but more light.

New cp2104 usb-to-uart ic, built-in ceramic antenna or external antenna PCB antenna. 11 digital input / i2c / pwm / output pins, all pins have interrupt / 1-wire; 1 analog input3.2v max input; 16m bytes128M bit Flash and a micro-USB connection. D1 mini pro development board is compatible with Arduino, MicroPython, NodeMCU. This is a powerful iot development board, with 16mb flash, external antenna connector and built-in ceramic antenna based on ESP-8266. And can be programmed in the Arduino IDE.
BrandAideepen #ad
ManufacturerAideepen #ad
Weight0.02 Pounds
Part Number7040187

4. AITRIP

#ad

AITRIP 3PCS D1 Mini Pro 16M Bytes External Antenna Connector NodeMCU Based ESP8266 ESP-8266EX CP2104 WiFi Development Board for WeMos

#ad
AITRIP #ad - D1 mini pro is a mini wifi board with 16mb128m bit flash, external antenna connector and built-in ceramic antenna based on ESP-8266EX. It stands out for having an external antenna connector.

The esp8266 is an all-rounder and a very popular wifi enabled micro-controller. Same size as d1 mini, but more light´╝îCompatible withMicroPython and NodeMCU. New cp2104 usb-to-uart iC. The d1 mini pro module has 11 digital i/o pins and all pins support interrupt/ pwm/ I2C/ 1 wire/ 1 analogue input 3. 2 maximum input. It offers a complete and self-contained WiFi networking solution. External antenna connector´╝ŤBuilt-in ceramic antenna. However, this latest version has been fundamentally revised; The ESP2866 D1 Mini Pro is smaller and lighter. Aitrip d1 mini pro is very similar to the traditional D1 Mini.
BrandAITRIP #ad
ManufacturerAITRIP #ad
Warranty1

5. Deeoee

#ad

1pcs WeMos D1 Mini ESP8266 WiFi Module Board Pro 16M Bytes External Antenna Contor ESP8266 WiFi IOT Development Board

#ad
Deeoee #ad - The goods are of good quality. The time limit is 3-7 days. We offer tens of thousands of electronic accessories and modules. You just need to send a refund request, we will full refund for you without asking.

85% conventional orders will be delivered within 7-18days. Some remote countries will take longer. We provide DHL expedited service. If the packages not be delivered on time or the products may not be satisfactory. Excluding preparation time. If the order amount is more than 150$, we will use the DHL service free of charge. You just need to search for keywords in my store. We make every effort to provide customers with satisfactory service.
BrandDeeoee #ad
ManufacturerDeeoee #ad
Part NumberDeMixModuleT_11259

6. Generic

#ad

For NodeMcu 16M Bytes Lua WiFi Internet Development Board, for Arduino, RedTagCanada D1 Mini PRO Development Board ESP8266 CP2104 16M Bytes External Antenna Connector ESP8266 WiFi IoT Board for WeMos

#ad
Generic #ad - This is a powerful iot development board, external antenna connector and built-in ceramic antenna based on ESP-8266. And can be programmed in the Arduino IDE.

New cp2104 usb-to-uart ic, built-in ceramic antenna or external antenna pcb antenna 11 digital input / I2C / pwm / output pins, all pins have interrupt / 1-wire; 1 analog input3.2v max input; 16m bytes128M bit Flash and a micro-USB connection. Same size as d1 mini, with 16MB flash, but more light. Esp8266, esp-12 fbuilt-in ceramic antenna or External antenna PCB antenna. 5v 1a cp2104 usb-to-uart ic. Compatible with wemos d1 mini pro nodeMcu 4M bytes based on ESP8266 Pro version with 16MB. D1 mini pro development board is compatible with Arduino, MicroPython, NodeMCU.
BrandGeneric #ad
ManufacturerUnbranded #ad
Warranty30 Days

7. StarMars

#ad

D1 Mini V3.1.0 WiFi IoT Development Board MicroPython Nodemcu Arduino Compatible D1 Mini V3.1.0

#ad
StarMars #ad - Further optimize the circuit. Breadboard friendly. New logo - lolin previous WeMos, D1 Mini. Upgraded from previous version V3. 00, v2. 3. 0, v2. 2. 0 . Compatible with MicroPython, Arduino, Nodemcu.
BrandStarMars #ad
ManufacturerWeMos #ad
Part NumberNa
Model8541549614